Article by: RobRed

Adaptable Models: 1998-2007 / 100 Series Land Cruiser or LX470

Last updated: June 20, 2017 at 20:24 pm

Below is a general list of components and parts needed to refurbish the front wheel bearings and or change the front brake pads and rotors. The part numbers are based off of a Land Cruiser and are compatible with the LX470. Note some differences in 2003+, you should of course always verify part numbers.

In addition to basic automotive hand tools and these parts you may also need several special tools including:

• brass hammer or drift
• 54mm Lock Nut Wrench or socket (OTC6612) AMAZON
• snap ring pliers/spreader SEARS
• spring type scale AMAZON
• bearing press or tap

 

Item	Qty	PN#	Note
Pad Retainer Pin	4	90240-06024	Replace if Needed (1998-)
Pad Retainer Fit Kit	1	04947-60100	Replace (1998-)
Anti Squeal Shim Kit	1	04945-60020	Replace (1998-2002)
Anti Squeal Shim Kit	1	04945-60010	Replace (2003-)
Brake Pad  Kit	1	04465-60220	Set, R/L (1998-2002)
Brake Pad  Kit	1	04465-60230	Set, R/L (2003-)
Caliper RH	1	47730-60080	(1998-2002)
Caliper LH	1	47750-60080	(1998-2002)
Caliper RH	1	47730-60090	(2003-)
Caliper LH	1	47750-60090	(2003-)
Cylinder Kit	1	04479-60040	(1998-)
Brake Disc	2	43512-60171	Replace or Surface (1998-)
Item	Qty	PN#	Note
Oil Seal	2	90311-70011	Replace
Inner Bearing	2	90080-36098	Replace
Outer Race	2	with bearing	Replace
Outer Race	2	with bearing	Replace
Outer Bearing	2	90080-36067	Replace
Thrust Washer	2	90214-42030	Replace if Needed
Adjusting Nut	2	43521-60011	Replace if Needed
Lock Washer	2	90215-42025	Replace
Gasket	2	43422-60070	Replace
Flange Stud	12	90116-10201	Replace if Needed
Flange Cone Washer	12	42323-60030	Replace if Needed
Flange Plate Washer	12	90201-10075	Replace if Needed
Flange Nut	12	90170-10039	Replace if Needed
Snap Ring	2	See listing below	Replace Vehicle Spec Svc Tolerance
Dust Cap	2	43423-35010	Replace
Snap Ring		90520-31005	2.8mm
		90520-31006	2.6mm
		90520-31007	2.4mm
		90520-31008	2.2mm
		90520-31009	2.0mm
		90520-31010	1.8mm

Diagrams: