Article by: RobRed

Applicable Models: 100 Series (1998-2003)

Last updated: April 17, 2016 at 15:55 pm

The list below represents a complete overhaul of parts in the steering gear of the Land Cruiser 100 (1998-2003). Most owners will likely only replace the rack itself (44250-60050) and the steering rack housing grommet (45517-60010). Tie Rod ends and Knuckles are wear items so inspect and replace as needed. The new steering rack comes with inner tie rods but I’ve listed the parts for them below in case you are just refurbishing.

Be sure to check with your parts specialist to confirm these part numbers for your vehicle.

QTY	Item	Toyota PN	Fits
1	Steering Rack Assy (New)	44250-60050	1998-2003
1	Outer Tie Rod RH, passenger	45046-69195	1998-2003
1	Outer Tie Rod LH, driver	45047-69100	1998-2003
1	Steering Knuckle RH	45611-60100	1998-2001
1	Steering Knuckle LH	45612-60100	1998-2001
2	Tie Rod inner nut	90170-20003	1998-2007
2	Bolt, Steering Knuckle RH	90105-14043	1998-2007
2	Bolt, Steering Knuckle LH	90105-14043	1998-2007
1	Steering Rack Housing Bracket	45515-60010	1998-2003
1	Steering Rack Housing Grommet	45517-60010	1998-2003
2	Bolt, Rack Housing Bracket	90105-14121	1998-2003
2	Bolt, Rack Mounting	90105-14122	1998-2003
2	Spacer, Rack Mounting	90560-15018	1998-2003
2	Nut, Rack Mounting	90178-14003	1998-2003
2	Quarts, Power Steer Fluid
	Addl Reference Parts	Not replacing steer rack
1	Inner Tie Rod, RH	45503-69015	1998-2003
1	Inner Tie Rod, LH	45503-69015	1998-2003